Visible Light and Microwave-Mediated Rapid Trapping and Release of Singlet Oxygen Using a Coordination Polymer.

Due to its high reactivity and oxidative strength, singlet oxygen (1 O2 ) is used in a variety of fields including organic synthesis, biomedicine, photodynamic therapy and materials science. Despite its importance, the controlled trapping and release of 1 O2 is extremely challenging. Herein, we describe a one-dimensional coordination polymer, CP1, which upon irradiation with visible light, transforms 3 O2 (triplet oxygen) to 1 O2 . CP1 consists of CdII centers bridged by 9,10-bis((E)-2-(pyridin-4-yl)vinyl)anthracene ligands which undergo a [4+2] cycloaddition reaction with 1 O2 , resulting in the generation of CP1-1 O2 . Using microwave irradiation, CP1-1 O2 displays efficient release of 1 O2 , over a period of 30 s. In addition, CP1 exhibits enhanced fluorescence and has an oxygen detection limit of 97.4 ppm. Theoretical calculations reveal that the fluorescence behaviour is dominated by unique through-space conjugation. In addition to describing a highly efficient approach for the trapping and controlled release of 1 O2 , using coordination polymers, this work also provides encouragement for the development of efficient fluorescent oxygen sensors.

Phase Transition-Promoted Rapid Photomechanical Motions of Single Crystals of a Triene Coordination Polymer.

Molecular crystals with the ability to transform light energy into macroscopic mechanical motions are a promising class of materials with potential applications in actuating and photonic devices. In regard to such materials, coordination polymers that exhibit dynamic photomechanical motion, associated with a phase transition, are unknown. Herein, we report an intriguing photoactive, one-dimensional ZnII coordination polymer, 1, derived from 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene and 3,5-difluorobenzoate. Single crystals of 1 under UV light irradiation exhibit rapid shrinking and bending, violent bursting-jumping, splitting, and cracking behavior. Single-crystal X-ray diffraction analysis and 1 H NMR spectroscopy reveal an unusual photoinduced phase transition involving a single-crystal-to-single-crystal [2+2] cycloaddition reaction that results in photomechanical responses. Interestingly, crystals of 1, which are triclinic with space group P 1 ‾ ${P\bar{1}}$ , are transformed into a higher symmetry, monoclinic cell with space group C2/c. This process represents a rare example of symmetry enhancement upon photoirradiation. The photomechanical activity is likely due to the sudden release of stress associated with strained molecular geometries and significant solid-state molecular movement arising from cleavage and formation of chemical bonds. A composite membrane fabricated from 1 and polyvinyl alcohol (PVA) also displays interesting photomechanical behavior under UV light illumination, indicating the material's potential as a photoactuator.

Photopolymerization-Driven Macroscopic Mechanical Motions of a Composite Film Containing a Vinyl Coordination Polymer.

We report a unique vinyl coordination polymer (CP), [Zn(4-Fb)2 (tkpvb)]n (1, 4-HFb=4-fluorobenzoic acid, tkpvb=1,2,4,5-tetrakis(4-pyridylvinyl)benzene) that undergoes a rare photopolymerization reaction to form a two-dimensional CP integrated with a one-dimensional linear organic polymer. Upon light irradiation at different wavelengths, 1 exhibits an unprecedented phenomenon of photoinduced nonlinear lattice expansion. 1 can be uniformly dispersed in polyvinyl alcohol (PVA) to form the composite film of 1-PVA. When this film is exposed to UV light, internal minute stresses within crystallites are released by lattice expansion, resulting in a variety of photopolymerization-driven macroscopic mechanical motions. The findings provide new insights into the conversion of small lattice expansions of CPs into macroscopic mechanical motions based on photopolymerization reactions, which can promote the development of CPs-based smart photoactuators in the burgeoning field of microrobotics.

Complexes of 2,4,6-trihydroxybenzoic acid: effects of intramolecular hydrogen bonding on ligand geometry and metal binding modes.

This article describes a series of more than 20 new compounds formed by the combination of 2,4,6-trihydroxybenzoic acid (H4thba) with metal ions in the presence of a base, with structures that include discrete molecular units, chains, and two- and three-dimensional networks. As a result of the presence of two ortho-hydroxy groups, H4thba is a relatively strong acid (pKa1 = 1.68). The carboxylate group in H3thba- is therefore considerably less basic than most carboxylates with intramolecular hydrogen bonds, conferring a rigid planar geometry upon the anion. These characteristics of H3thba- significantly impact upon the way it interacts with metal ions. In s-block metal compounds, where the interaction of the metal centres with the carboxylate O atoms is essentially ionic, the anion bonds to up to three metal centres via a variety of binding modes. In cases where the metal ion is able to form directional coordinate bonds, however, the carboxylate group tends to bond in a monodentate mode, interacting with just one metal centre in the syn mode. A dominant influence on the structures of the complexes seems to be the face-to-face stacking of the aromatic rings, which creates networks containing layers of metal-oxygen polyhedra that participate in hydrogen bonding. This investigation was undertaken, in part, by a group of secondary school students as an educational exercise designed to introduce school students to the technique of single-crystal X-ray diffraction and enhance their understanding of primary and secondary bonding.

Multi-Redox Responsive Behavior in a Mixed-Valence Semiconducting Framework Based on Bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane.

The two-dimensional (2-D) framework, [Cu(BTDAT)(MeOH)] {BTDAT = bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane}, possesses remarkable multi-step redox properties, with electrochemical studies revealing six quasi-stable redox states in the solid state. In situ electron paramagnetic resonance and visible-near infrared spectroelectrochemistry elucidated the mechanism for these multi-step redox processes, as well as the optical and electrochromic behavior of the BTDAT ligand and framework. In studying the structural, spectroscopic, and electronic properties of [Cu(BTDAT)(MeOH)], the as-synthesized framework was found to exist in a mixed-valence state with thermally-activated semiconducting behavior. In addition to pressed pellet conductivity measurements, single-crystal conductivity measurements using a pre-patterned polydimethylsiloxane layer on a silicon substrate provide important insights into the anisotropic conduction pathways. As an avenue to further understand the electronic state of [Cu(BTDAT)(MeOH)], computational band structure calculations predicted delocalized electronic transport in the framework. On the balance of probabilities, we propose that [Cu(BTDAT)(MeOH)] is a Mott insulator (i.e., electron correlations cause a metal-insulator transition). This implies that the conductivity is incoherent. However, we are unable to distinguish between activated transport due to Coulombically bound electron-hole pairs and a hopping mechanism. The combined electrochemical, electronic, and optical properties of [Cu(BTDAT)(MeOH)] shine a new light on the experimental and theoretical challenges for electroactive framework materials, which are implicated as the basis of advanced optoelectronic and electrochromic devices.

Mixed valency in a neutral 1D Fe-chloranilate coordination polymer.

The syntheses and structures of a pair of neutral one-dimensional (1D) Fe-anilate based coordination polymers, Fe(Fan)(4,4'-bipy)2 (Fann- = deprotonated 3,6-difluoro-2,5-dihydroxy-1,4-benzoquinone; 4,4'-bipy = 4,4'-bipyridine) and Fe(Clan)(OPPh3)2 (Clann- = deprotonated 3,6-dichloro-2,5-dihydroxy-1,4-benzoquinone; OPPh3 = triphenylphosphine oxide), are reported. In the case of Fe(Fan)(4,4'-bipy)2, the Fe centre is in the +2 oxidation state and the Fan ligand is present in its quinoidal, dianionic form. In contrast, the structurally similar Fe(Clan)(OPPh3)2 chain contains Fe centres and chloranilate ligands in oxidation states close to +3 and -3 respectively at low temperature. It is suggested that intrachain π-π interactions aid electron transfer from the Fe centres to the bridging ligands.

Flexible Vertex Engineers the Controlled Assembly of Distorted Supramolecular Tetrahedral and Octahedral Cages.

Designing and building unique cage assemblies attract increasing interest from supramolecular chemists but remain synthetically challenging. Herein, we propose the use of a flexible vertex with adjustable angles to selectively form highly distorted tetrahedral and octahedral cages, for the first time, in which the flexible vertex forms from the synergistic effect of coordination and covalent interactions. The inherent interligand angle of the vertex can be modulated by guest anions present, which allows for the fine-tuning of different cage geometries. Furthermore, the reversible structural transformation between tetrahedral and octahedral cages was achieved by anion exchange monitored by mass spectrometric technique, the smaller anions favoring tetrahedral cages, while the larger anions supporting octahedral cages. Additionally, the KBr-based cage thin films exhibited prominent enhancement of their third-order NLO responses in two or three orders of magnitude compared to those obtained for their corresponding solutions. This work not only provides a new methodology to build irregular polyhedral structures in a controlled and tunable way but also provides access to new kinds of promising functional optical materials.

Multifunctional Coordination Polymer Exhibiting Reversible Mechanical Motion Allowing Selective Uptake of Guests and Leading to Enhanced Electrical Conductivity.

A remarkably flexible, multifunctional, 2D coordination polymer exhibiting an unprecedented mode of reversible mechanical motion, enabling pores to open and close, is reported. Such multifunctional materials are highly sought after, owing to the potential to exploit coexisting electronic and mechanical functionalities that underpin useful technological applications such as actuators and ultrasensitive detectors. The coordination polymer, of composition Mn(F4TCNQ)(py)2 (F4TCNQ = 2,3,5,6-tetrafluoro-7,7,8,8-tetracycanoquinodimethane; py = pyridine), consists of Mn(II) centers bridged by F4TCNQ dianions and coordinated by py molecules that extend above and below the 2D network. Exposure of Mn(F4TCNQ)(py)2, in its collapsed state, to carbon dioxide results in a pore-opening process at a threshold pressure for a given temperature. In addition to carbon dioxide, a variety of volatile guests may be incorporated into the pores, which are lined with electron-rich F4TCNQ dianions. The inclusion of electron-deficient guests such as 1,4-benzoquinone, nitrobenzene, maleic anhydride, and iodine into the pores is accompanied by a striking color change associated with a new host-guest charge-transfer interaction and an improvement in the semiconductor behavior, with the iodine adduct showing an increase in conductivity of almost 5 orders of magnitude. Experimental and density functional theory calculations on this remarkable multifunctional material demonstrate a reduction in the optical band gap with increasing electron affinity of the guest.

Alkali metal salts of 4-hydroxybenzoic acid: a structural and educational study.

As part of an educational exercise designed to introduce school students to the technique of single-crystal X-ray diffraction and enhance their understanding of primary and secondary bonding, a group of nine secondary school students was given the opportunity to prepare new compounds and to solve and refine data collected on the crystalline materials they had prepared. Their investigation of the alkali metal salts of 4-hydroxybenzoic acid (H2hba) yielded nine new compounds and their structures are described in this article. Whilst the salts might be expected to have similar atomic arrangements, there are significant differences in their structures. Although H2hba is a relatively simple organic molecule, it displays remarkable coordinative flexibility, forming ionic solids containing the uncharged molecule, the monoanion Hhba- or the dianion hba2-. A common feature of the structures is their layered arrangement: alternating hydrophilic layers made up of closely packed metal-oxygen polyhedra separated by the hydrophobic component of the hydroxybenzoate linking units. Close packing of these units seems to be a dominant influence in determining the overall structure. The hydroxybenzoate units are usually both parallel and antiparallel with their immediate neighbours, with packing that can be edge-to-face, face-to-face or a mixture of the two. Hydrogen bonding plays a key role in the structure of most compounds and a short strong hydrogen bond (SSHB) is observed in two of the networks. The compounds of 4-hydroxybenzoic acid, C7H6O3, described here are: poly[di-µ-aqua-µ-4-oxidobenzoato-dilithium], [Li2(C7H4O3)(H2O)2]n, 1, poly[triaqua-µ-4-oxidobenzoato-dilithium], [Li2(C7H4O3)(H2O)3]n, 2, poly[µ-4-hydroxybenzoato-lithium], [Li(C7H5O3)]n, 3, catena-poly[4-hydroxybenzoate [[diaquasodium]-di-µ-aqua]], {[Na(H2O)4](C7H5O3)}n, 4, poly[di-µ-aqua-aqua-µ-4-hydroxybenzoato-potassium], [K(C7H5O3)(H2O)3]n, 5, poly[µ-aqua-µ-4-hydroxybenzoato-potassium], [K(C7H5O3)(H2O)]n, 6, poly[aqua-µ-4-hydroxybenzoato-rubidium], [Rb(C7H5O3)(H2O)]n, 7, poly[aqua-µ-4-hydroxybenzoato-caesium], [Cs(C7H5O3)(H2O)]n, 8, poly[[µ-aqua-aqua(µ-4-hydroxybenzoato)(4-hydroxybenzoic acid)sodium] monohydrate], {[Na(C7H5O3)(C7H6O3)(H2O)2]·H2O}n, 9, poly[[(µ-4-hydroxybenzoato)(µ-4-hydroxybenzoic acid)rubidium] monohydrate], {[K(C7H5O3)(C7H6O3)]·H2O}n, 10, and poly[[(µ-4-hydroxybenzoato)(µ-4-hydroxybenzoic acid)rubidium] monohydrate], {[Rb(C7H5O3)(C7H6O3)]·H2O}n, 11.

The Effect of Sterically Active Ligand Substituents on Gas Adsorption within a Family of 3D Zn-Based Coordination Polymers.

An investigation of the adsorption properties of two structurally related, 3D coordination polymers of composition Zn(2-Mehba) and Zn(2,6-Me2hba) (2-Mehba = the dianion of 2-methyl-4-hydroxybenzoic acid and 2,6-Me2hba = the dianion of 2,6-dimethyl-4-hydroxybenzoic acid) is presented. A common feature of these structures are parallel channels that are able to accommodate appropriately sized guest molecules. The structures differ with respect to the steric congestion within the channels arising from methyl groups appended to the bridging ligands of the network. The host network, Zn(2-Mehba), is able to take up appreciable quantities of H2 (77 K) and CO2 and CH4 (298 K) in a reversible manner. In regard to the adsorption of N2 by Zn(2-Mehba), there appears to be an unusual temperature dependence for the uptake of the gas such that when the temperature is increased from 77 to 298 K the uptake of N2 increases. The relatively narrow channels of Zn(2,6-Me2hba) are too small to allow the uptake of N2 and CH4, but H2 molecules can be adsorbed. A pronounced step at elevated pressures in CO2 and N2O isotherms for Zn(2,6-Me2hba) is noted. Calculations indicate that rotation of phenolate rings leads to a change in the available intraframework space during CO2 dosing.

Effects of Mixed Valency in an Fe-Based Framework: Coexistence of Slow Magnetic Relaxation, Semiconductivity, and Redox Activity.

A 2-D coordination framework, (NEt4)2[Fe2(fan)3] (1·5(acetone); H2fan = 3,6-difluoro-2,5-dihydroxy-1,4-benzoquinone), was synthesized and structurally characterized. The compound is structurally analogous to a formerly elucidated framework, (NEt4)2[Fe2(can)3] (H2can = 3,6-dichloro-2,5-dihydroxy-1,4-benzoquinone), and adopts a 2-D (6,3) topology with the symmetrical stacking of [Fe2(fan)3]2- sheets that are held in position by the NEt4+ cations between the sheets. The investigation of the dc and ac magnetic properties of 1·5(acetone) revealed ferromagnetic ordering behavior and slow magnetization relaxation, as evinced from ac susceptibility measurements. Furthermore, the exposure of 1·5(acetone) to air led to the formation of a heptahydrate 1·7H2O which displayed distinct magnetic properties. The study of the redox state and extent of delocalization in 1·5(acetone) was undertaken via crystallography, in combination with Mössbauer and vis-NIR spectroscopy, to reveal the mixed-valence and delocalized nature of the as-synthesized material. As a result, the conductivity studies conducted on a pressed pellet showed a relatively high conductivity of 1.8 × 10-2 S cm-1 (300 K). In order to compare structurally related anilate-based structures, a relationship among the redox state, spectroscopic properties, and electronic properties was elucidated in this work. A preliminary investigation of 1·5(acetone) as a candidate anode material in lithium ion batteries revealed a high reversible capacity of 676.6 mAh g-1 and high capacity retention.

Clam-like Cyclotricatechylene-based Capsules: Identifying the Roles of Protonation State and Guests as well as the Drivers for Stability and (Anti-)Cooperativity.

Cyclotricatechylene (ctcH6 ) is a bowl-shaped macrocyclic compound that can be used as a building block for self-assembled capsules. ctcH6 and its derivatives in various protonation states - here collectively labeled as CTC - form dimers that resemble the shape of a clam. These clam-shaped entities have been studied experimentally by Abrahams, Robson, and co-workers [B. F. Abrahams, N. J. FitzGerald, T. A. Hudson, R. Robson and T. Waters, Angew. Chem. Int. Ed. 2009, 48, 3129-3132] where the capsules acted as an excellent host for large alkali-metal cations. In this study, we present a detailed analysis based on accurate dispersion-corrected Density Functional Theory approaches that reveals the factors that stabilise such CTC-based capsules at different protonation states and their interaction with various encapsulated guests. Our results show that the capsules' overall stability results as an interplay of hydrogen bonding, London dispersion, and electrostatic effects. The most stable capsules with group-1 and group-2 cations as guests contain only six phenolic hydrogens, as opposed to the maximum possible number of twelve. Inclusion of larger alkali-metal cations is favoured due to larger London-dispersion contributions. Cations are favoured as guests over isoelectronic neutral species, as the resulting host-guest complexes experience additional stability due to cooperative effects. In fact, using the latter to drive the formation of specific capsules could be used in future strategies aimed at synthesising similar aggregates; our results provide an insightful understanding and useful guidance for such future endeavours.

Fabrication of Photoactuators: Macroscopic Photomechanical Responses of Metal-Organic Frameworks to Irradiation by UV Light.

Photoreactive olefinic species are incorporated into a metal-organic framework (MOF), [Zn(bdc)(3-F-spy)] (1). Single crystals of 1 are shown to undergo three types of photomechanical macroscopic deformation upon illumination by UV light. To demonstrate the practical potential of this system, the inclusion of 1 in a PVA (polyvinyl alcohol) composite membrane, by exploiting hydrogen-bonding interactions, is presented. Using this composite membrane, the amplification of mechanical stress to achieve macroscopic actuation behavior is demonstrated. These results pave the way for the generation of MOF-based soft photoactuators that produce clearly defined mechanical responses upon irradiation with light. Such systems are anticipated to have considerable potential in photomechanical energy harvesting and conversion systems.

A Multifunctional, Charge-Neutral, Chiral Octahedral M12 L12 Cage.

A chiral, octahedral M12 L12 cage, which is charge neutral and contains an internal void of about 2000 Å3 , is reported. The cage was synthesised as an enantiopure complex by virtue of amino-acid-based dicarboxylate ligands, which assemble around copper paddlewheels at the vertices of the octahedron. The cage persists in solution with retention of the fluorescence properties of the parent acid. The solid-state structure contains large pores both within and between the cages, and displays permanent porosity for the sorption of gases with retention of crystallinity. Initial tests show some enantioselectivity of the cage towards guests in solution.

A 3D [WS4Cu4]2+ cluster-based material with high iodine uptake capability.

A high symmetry heterothiometallic cluster-based 3D framework of composition [WS4Cu4(µ-CN)2(bpea)2]·1.5DMF was obtained from the combination of (NH4)2WS4, CuCN and 1,2-bis(4-pyridyl)ethane (bpea). It holds an unusual topology with [WS4Cu4]2+ clusters linked by CN- and bpea bridging ligands. An interesting feature of this cubic structure is the presence of isolated hexagonal channels that extend in four distinct directions. Its desolvated sample demonstrated high performance in the adsorption of iodine from solution.

Square Grid Metal-Chloranilate Networks as Robust Host Systems for Guest Sorption.

Reaction of the chloranilate dianion with Y(NO3 )3 in the presence of Et4 N+ in the appropriate proportions results in the formation of (Et4 N)[Y(can)2 ], which consists of anionic square-grid coordination polymer sheets with interleaved layers of counter-cations. These counter-cations, which serve as squat pillars between [Y(can)2 ] sheets, lead to alignment of the square grid sheets and the subsequent generation of square channels running perpendicular to the sheets. The crystals are found to be porous and retain crystallinity following cycles of adsorption and desorption. This compound exhibits a high affinity for volatile guest molecules, which could be identified within the framework by crystallographic methods. In situ neutron powder diffraction indicates a size-shape complementarity leading to a strong interaction between host and guest for CO2 and CH4 . Single-crystal X-ray diffraction experiments indicate significant interactions between the host framework and discrete I2 or Br2 molecules. A series of isostructural compounds (cat)[MIII (X-an)2 ] with M=Sc, Gd, Tb, Dy, Ho, Er, Yb, Lu, Bi or In, cat=Et4 N, Me4 N and X-an=chloranilate, bromanilate or cyanochloranilate bridging ligands have been generated. The magnetic properties of representative examples (Et4 N)[Gd(can)2 ] and (Et4 N)[Dy(can)2 ] are reported with normal DC susceptibility but unusual AC susceptibility data noted for (Et4 N)[Gd(can)2 ].

Self-assembly of a Si-based cage by the formation of 24 equivalent covalent bonds.

A robust, nano-sized covalent cage, of composition, [(PhSi)6(ctc)4]6- (H6ctc = cyclotricatechylene) has been prepared in a simple reaction in good yield. The tetrahedral anionic cage is stable in both the solid and solution state and exhibits an affinity for Cs+ ions which bind to the internal surface of the cage.

Stereoselective Solid-State Synthesis of Substituted Cyclobutanes Assisted by Pseudorotaxane-like MOFs.

Regioselective photodimerization of trans-4-styrylpyridine (4-spy) derivatives is performed using pseudorotaxane-like Zn-based metal organic frameworks MOFs as templates. The formation of rctt-HT (head-to-tail) dimers is achieved by confining pairs of coordinated 4-spy derivative ligands within hexagonal windows and then irradiating them with UV light. It is also possible to achieve a photodimerization reaction where two different substituted 4-spy ligands are included in such a MOF material. The ether bond formation is employed to protect the sensitive -OH group of HO-spy and the methyl group of CH3 O-spy is subsequently removed after the formation of cyclobutane derivative in the CH3 O-spy-based MOF. Introducing substituents at the 2- or 3-position of the phenyl group of 4-spy does not significantly affect the rate of the dimerization process except in the case of the strongly electron-withdrawing nitro group where the rate is significantly decreased. These results are in striking contrast to the mixtures of photoproducts and low yields obtained by untemplated photodimerization in organic solvents.

Covalent switching, involving divinylbenzene ligands within 3D coordination polymers, indicated by changes in fluorescence.

Reversible cycloaddition reactions between 1,4-bis[2-(3-pyridyl)ethenyl]benzene and its photodimers were performed within a pair of three-dimensional coordination polymers with retention of single crystal character. In each case, switching between two crystalline forms could be followed by monitoring the flourescence behaviour.

Interligand Charge-Transfer Interactions in Electroactive Coordination Frameworks Based on N, N'-Dicyanoquinonediimine (DCNQI).

Coordination frameworks containing DCNQI2- (DCNQI = N, N'-dicyanoquinonediimine ligand) are produced by deprotonation of DCNQIH2 in the presence of a metal center and a co-ligand. This approach has yielded two-dimensional (2D) sheet compounds [Cd(DCNQI)(L)2] (where L = pyridine (py) or isoquinoline (isoquin)) that can be partially oxidized via solid-state electrochemical and in situ spectroelectrochemical methods to materials that contain DCNQI as its radical monoanion. The new frameworks display charge-transfer bands that are indicative of interligand charge-transfer interactions as supported by TD-DFT computational calculations. The redox-state dependent spectral properties of the frameworks have been probed using a newly developed solid-state spectroelectrochemical cell. Coupled with computational calculations, the experimental data provide an understanding of the fundamental charge-transfer processes that may underpin long-range functional properties such as conductivity in framework materials.